Case Study: My Experience With Wood

Wood Preservation Methods

The study of wood as a renewable material and organic material is what is known as wood science. Wood technology is now the way the tools are utilized in the processes of wood preservation. Other products are put alongside wood for easy testing and study. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. The many Merits of timber and these technologies improve wood to be superior over other products. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. It is also based on renewable resources. Timber can be utilized in very many applications, and this makes it more valuable.

For your wooden products and house to stay for long and have a good appearance it needs to be protected. This protection is from moisture and insects which are the biggest threat to wood. The rotting and decay of the timber products are caused by the moisture and the insects. There are many ways timber is treated among them being the ACQ in other words alkaline copper Quaternary. This is a copper-based preservative that is applied to the wood for protection. Although being a good method to use for wood protection it has presents some few challenges. It has been seen corroding most metals for example aluminum in less than six months of its application. The saturation level of any treatment will depend on where the wood is going to be used and the species of the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.

Many methods are being invented to protect the wood, and one of them is the copper metal method. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The difference between this method and the other copper-based methods is that the copper is used as a metal rather than a dissolved material. This process is highly effective and the wood properties and heightened. The wood products protected using this method last longer.

Termites cannot eat through timber treated through this method. It is not corrosive to metals used in together with the product. The wood treated using this method last longer and is stronger.